RAZZI Front and Rear Air Dams are NOT "Bumper Replacements!

RAZZI Front and Rear Air Dams attach onto the existing stock-factory bumper fascia. When installing a RAZZI part, you would NEVER REMOVE the stock-factory front or rear bumper cover/fascia.

With the presence of the air bag "sensors" and with all the "crash testing" and other safety related issues of these parts, RAZZI would NEVER recommend removing any stock-factory bumper cover/fascia and replacing it with another manufacturer's Ground Effects part, unless that part has been put through the same rigorous testing procedures as the original bumper cover/fascia.

The factory bumper covers on a car or truck have been crash tested so they work properly with the vehicle’s “air bag system” and any other factory “safety issues”. We, at Razzi, do not feel that these factory parts should be removed; and strongly disagree with any company who recommends it, unless they are replaced with parts that have been equally tested to work properly with the vehicle’s “air bag system” and any other “safety features”. That is why Razzi makes all of our parts to go over or onto the factory bumper covers.

On some of our models, it is necessary to trim the lower part of the existing bumper cover during the installation process to allow for the Razzi design of the part and this is NOT a problem. Just follow our installation instructions to LEAVE ALL SUPPORT SYSTEMS INTACT. We have designed and engineered all Razzi Ground Effects parts so that all factory bumper cover supports or attachments are left untouched. Trimming the lower portion of a bumper cover DOES NOT disrupt the functionality of the cover or any of the safety features.

If you look closely at most of our pictures you can see the top edge of the Razzi Front or Rear Air Dams. Don’t think that our parts are little – because, in most cases, they are very large. WE JUST DO NOT REPLACE/REMOVE FACTORY BUMPER COVERS.

Razzi Ground Effects parts require tremendous engineering and fitting skills by Razzi to get them “just right” ….. making sure that the parts fit properly over and/or onto the existing factory tested bumper covers.

We like our customers and we do not want you to ever get injured because an air bag in your vehicle failed to deploy. We are sure that you also care for your safety and for your loved ones who might be in your vehicle.

For more information, email Razzi at info@razzi.com